The lobular rosewood is the king of wood, the wood is stable, the furniture and beading are made of color and quiet, the most important thing is that it is not easy to deform and crack, but the newly purchased beads are not formed into a slurry, and the wood surface and the central part are in a dry environment. Unbalance, especially for the newly produced and processed beads, the higher the density, the less the surface grease is, the more likely it is to crack. Winter is a good season for beading, and it is a season that is easy to crack. How to maintain the lobular rosewood? How to prevent cracking in the lobular rosewood beads? Maintenance of lobular rosewood Keep the environment moist If the beads are purchased from the south, going to the north requires a process of relaxation and adaptation to the environment. In the past, the production of furniture required a drying process. However, due to the high market demand, the Beads manufacturers did not have the process of natural release and drying. Once the products came out, they immediately went to the players, so the first week was sealed for a week. The ambient temperature is preferably placed for a longer period of time, allowing it to naturally oxidize the pulp and then play it on the plate to keep the environment moist. The winter in the north is dry and cold in winter, and the temperature difference between indoor and outdoor is large. It is especially necessary to pay attention to the condition that a humidifier can be arranged indoors. , balance the air and humidity. Sealed and saved when not in use Preservation in a sealed bag is a way to avoid water loss. Sealed after the plate is finished, it can avoid cracking to the utmost. If the surface is too dry, it can be placed in a sealed bag with a cotton swab. This is especially suitable for the dry season in winter. Waxed and oiled for protection This said, it is estimated that many players will have objections, because many people know that red sandalwood can not be oiled wax, which is the experience that many players have summed up. But the waxed and oiled bracelets have high gloss and are not easy to crack, so it is relatively worry-free to take care of. The best waxing is natural beeswax. In addition to moisturizing and restoring wood, the waxing itself has a water-repellent property and natural soft luster. It can form a protective layer on the surface of the wood to isolate moisture and enhance the glossy texture of the surface. Extend the service life, and the wax will not completely seal the original pores of the wood, and will not affect the natural fragrance emission and the respiration of heat and cold. If you grasp it properly, you are really worried that cracking is not a friend who pursues the ultimate appearance. You can still try it. You can never use olive oil and cooking oil. It is easy to blacken. No matter what oil or amount, it is definitely harmful to the beads. The direct consequence is that The oily material blocks the tube hole and prevents the oil in the red sandalwood from being precipitated, which affects the patina. It turns out that a small amount of silicone oil is wiped clean to form a thin protective film that locks in moisture, which can avoid cracking to a certain extent. But the premise is that the amount must be very small, and the density should be high, the number of polishing should be fine, and then wiped off with cotton cloth, so that there is not a lot of silicone oil left on the wooden surface to affect the patina. I still recommend everyone here, not to be forced, not to oil. Daily maintenance of lobular rosewood Avoid hot and cold, do not place in an environment that is too humid or too dry, such as near high-temperature hot places such as stove heating, or too humid in the basement to avoid mold or dry cracks. In fact, the probability of cracking of red sandalwood is still relatively low, so don't worry too much, but if it is a new string, the density is high, the surface is relatively dry, and the external factors such as seasonal climate, in order to prevent cracking, it still needs more attention.
Hex Bolts can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. Hex bolts with forged heads are also commonly used as headed anchor bolts.
Many Screws and bolts are identified by their drive style. Unlike the `standard` Phillips or Slotted drive, hex bolts are distinct because of their six-sided (hexagonal) heads. This style of bolt is the industry standard for fasteners with forged heads. While most hex bolts are partially threaded, fully threaded hex sets are also widely used.
hex head bolt, allen head bolt, hex bolt FinExpress Precision Manufacturing(Dongguan) Co., Ltd , https://www.finexpresshardware.com