The surface of the alloy blade is flat and smooth . The blade width is 2.5cm, Shading can also give indoor fresh air blade free turnover day lighting. Aluminum magnesium alloy leaves treated by baking process are waterproof and oil proof, suitable for kitchen, bathroom, and office. Encrypt aluminum piece, close closely, do not leave aperture, shading is strong enjoy the illicit close space that belongs to him. High strength aluminum alloy material, good toughness, blade is not easy to break deformation. Keep out ultraviolet rays, shade the sun and heat insulation, save energy and cool down. Manual, electric and remote control system selection, simple and convenient operation. Aluminum Window Blinds,White Aluminium Venetian Blinds,Aluminum Curtain Blinds,Curtain Blind Aluminum Alloy SHAOXING XIANHENG INTERNATIONAL LTD. , https://www.sxcurtain.com
A drying time should not be too long, the frequency is too frequent
1) The best drying time is from 11 noon to 2 pm. Usually, the cotton fiber will reach a certain degree of swelling after being exposed to sunlight for three or four hours. It has received a good drying effect, and the drying time is too long. If the number of times is too high, the cotton fiber will be shortened and the hair will fall off, and the warmth of the bedding will be greatly reduced.
2) Especially duvet bedding and wool are smashed because they contain oil in their materials, and these substances undergo chemical changes and odor after exposure.
3) While the silk is exposed to the sun, it will destroy the protein components in the material, causing discoloration and cracking. They only need to be placed in a dry and ventilated place to dry for one to two hours.
B can't be outside
1) It is best to be exposed to the sun when drying. Protect the material of the face 2) Let the inside directly touch the sunlight to receive the best drying effect. If you consider that there are too many dusts, you are used to facing the outside. You should cover the surface with a thin cloth to protect the quilt, especially the chemical fiber fabric, from being burnt at high temperatures.
C drying out, avoid using force
1) The fiber of cotton is thick and short, and it is very easy to break. If you beat it with a stick, it will break the fiber into dusty cotton dust.
2) The bedding made of synthetic fiber is thin and long, and it is easy to be deformed. Once the fiber is compacted, the fiber compaction plate can not be restored.
3) The duvet can not be beaten, otherwise the down will break into a small "feather dust", and the warming effect will be affected.